Clean & Dry provides a desiccant-based construction drying system.  Clean & Dry ends construction site moisture problems with dehumidification, instead of dangerous propane heaters or the building’s A/C system.  Clean & Dry dehumidifiers continuously replace humid air inside the building with air which has been dehumidified.  This extremely dry air has a low "vapor pressure."   As a result it attracts moisture molecules from wet surfaces - such as recently poured concrete, joint compound, freshly painted walls, stored building materials, etc. - allowing them to dry at an accelerated rate.  Clean & Dry provides a turnkey moisture reduction and management process for the builder during critical construction phases.  Clean & Dry provides a desiccant dehumidifier to the job site and temporary ductwork to run throughout the construction project.  Accelerating the drying of such products as concrete, joint compound, and paint reduces overall construction cycle time. 

Deeply dehumidified air, when exposed to water damaged environments, will attract water molecules from wet substances, such as wallboard, concrete block and wood floors, drying them. After a flood, the ambient air is too humid to attract the molecules and dry the objects quickly. Thus, not using Clean & Dry services can result in the loss of property from deterioration or biological contamination.

Time and time again satisfied customers tell us how our services seem miraculous! Sometimes-in just days!-we help them go from total devastation to business as usual. Here are some of the ways Clean & Dry can help after water damage:

A wide range of moisture related deterioration occurs after a building is water damaged. Wood swells, buckles or begins to rot, sheetrock loses rigidity and strength, electrical wiring corrodes, metal components rust, paint peels, and more. All of these effects can be arrested-and many reversed!-by the prompt employment of deep drying techniques.

Water-damaged books, documents, files, microfilm/microfiche, X-rays, blue prints, audio/video tape and artwork can all be saved. Often files can be dried in place, allowing access to records during the restoration process. Large libraries can be taken by Clean & Dry to one of its drying partners for careful processing and restoration…

Floor covering subcontractors won't guarantee their work if subflooring does not meet the manufacturer's standard for moisture content. Why risk buckling, delamination and adhesive failures? Clean & Dry can dry your subfloors to manufacturer's specs in record time.

Moisture sensitive materials such as wood flooring, plywood, drywall and masonry powders can gain moisture when staged in out door areas or humid interior spaces. Clean & Dry can dry your storage area so materials do not take on unwanted moisture while awaiting use.

Buildings under construction can be particularly susceptible to storm damage, water main breaks or leaks in unfinished roofs. Once inside the building, moisture is absorbed by structural materials, only to cause problems throughout construction and later. If your building has had severe water damage, call Clean & Dry. In days, Clean & Dry will create optimum conditions for finishing work, by deeply drying water locked inside walls, floors and masonry.